Identification should include

listing the causes of poor stopping (e.g., long stopping distances, pulling, grabbing, dragging, or balance problems)
confirming that air pressure is at least 90 psi before beginning the test drive
confirming that the brake pedal has the proper amount of resistance when pressed
confirming that the brake pedal has the proper amount of resistance when pressed
driving the vehicle through a variety of braking scenarios to check for even and smooth braking
confirming that there is no excessive stopping distance, pulling, grabbing, dragging, or balance problems under normal braking conditions.

ASE 3: III. Brakes: A. General (P-1)

Process/Skill Questions: